GTEC 22kW / 30HP Screw Compressor (GTEC2213)

Code: GTEC2213
Item in Stock | Usually dispatched within 48 hours
Loading...

GTEC 22kW / 30HP Screw Compressor

Specification:

  • Capacity: 85cfm (2400ltr/min)
  • Pressure: 13 Bar (188psi) / 22kW (30HP) / 500ltr Receiver
  • Sound: 71dB(A)
  • Length:1980mm
  • Width: 730mm
  • Height: 1750mm

Features of this Screw Compressor include:

  • Roof mounted generously sized oil cooler for easy installation, colour operation and improved air quality.
  • Super silencing cabinet with door sealing joints, noise levels to 64dB(A).
  • Long life high efficiency poly-v belt drive with much longer life and lower power losses.
  • High efficiency ie.2 Electric motor
  • Compact Air Receiver requires less than 1 sq. meter (270ltr Receiver)
  • Thermostatically controlled low noise centrifugal fan.
  • DNAir Controller with fully programmable facility, diagnostics, clear menu driven display and ability to control a four machine network.
  • Refrigerated dryer with aluminium combi cooler hot gas by-pass and over temperature/pressure switch.
  • Two compressed air line filters 0.01ppm, with simple access through the cabinet door
  • By-pass facility for dryer/filters
  • Just one power supply connection allowing quick installation
  • Automatic programmable condensate drain with single outlet.

Low Noise Level: The centrifugal fan design along with the careful arrangement of other components when added to the extensive insulation results in the G-Tec offering the lowest operating noise levels available.

DNAir2 Electronic Controller: The main controller provides a multi-function backlit LCD graphic display, the menu is drop down type for simple intuitive operation.  The display utilizes familiar and convenient icons for ease of use.

Expansion Module Options: GSM/GPRS/Ethernet/WiFi module (for on-line compressor status, remote assistance, connection with PC, Smartphone and Tablet, connection between neighbour compressors).

Master/Slave Function: It is possible to connect up to 4 compressors for managing the workload in such a way to equalize the hours of each compressor in a network to ease servicing.  The system pressure can be dynamically programmed to various set pressures according to usage.

High Efficiency: The design of the G-TEC compressors, including the high efficiency IE3 motors, has been fully focused on combining the different components that make up a perfect compressed air installation for a completely integrated, modular and functional system that combines maximum convenience with optimum energy efficiency.

Other Features:

  • Belt-Driven Transmission and Belt Protection System
  • IR30 Intake Regulator
  • Cooling Air Prefiltration Panel
  • Spin-on Filters
  • Minimum Pressure Valve
  • Thermostatic Valve
  • Heat Exchanger
  • Cooling System

FOR CAPITAL EQUIPMENT ENQUIRIES

Prices on Application - Contact us today on (028) 7131 2225 for further details.

FOR ALL OTHER PRODUCTS

* FREE Delivery on all orders over £50 / €70 to UK & Ireland *

Delivery Service

Below £50 / €70

Above £50 / €70

Delivery Time

Northern Ireland

£5.25

FREE

Next Day
(if ordered by 14:00)

Republic of Ireland

£7.50

FREE

Next Day
(if ordered by 14:00)

United Kingdom

£10.00

FREE

1-3 Days
(if ordered by 14:00)

Europe

£33.33

-

5-7 Days
(if ordered by 14:00)

Bulky Items

FREE Delivery to NI, ROI & UK Mainland on all Launch 2-Post Car & Van Lifts

Please contact us directly for prices, and to arrange carriage for all other bulky orders and heavy equipment.

When will my order be dispatched?

We endeavour to get your order to you in the shortest period available.

Delivery may take longer in the following instances:

  • The availability of one of your order items may have changed from when you purchased
    If this is the case, we will e-mail to help you find an alternative
  • If it is a UK / ROI Bank Holiday period

 
Check my Order Status

Please note, stock is updated hourly and is not live.  All unfulfilled orders will be placed on back order where applicable.

To confirm stock availability, please call (028) 7131 2225 Monday to Friday, 7.30 am to 4.30 pm.

Please contact us at any point and we can give you status of your delivery.

*Please note all prices exclude VAT

Please contact us for information on Payment & Security.

Be the first to review GTEC 22kW / 30HP Screw Compressor (2213). Write a review
Product Information:1+ Quantity qty
GTEC 22kW / 30HP Screw Compressor (GTEC2213) 1+ £0.00 (ex. VAT) 0 In stock | This product is not available online. To enquire about this product please contact us
£0.00 (ex. VAT)
0
Total: £0.00 (ex. VAT)
Top